Back to Insights

Suporte em balanço de braço oscilante

Side view of a double-sided swing arm cantilever rack with arms fully extended for steel tube access

Stop damaging your high-purity stainless steel tubes during retrieval. In the metal processing industry, “digging” for the right heat number or alloy grade buried at the bottom of a stack isn’t just a waste of time—it’s a quality risk. Our Suporte em balanço de braço oscilante systems allow 100% accessibility to every bundle, eliminating side-damage from forklifts and maximizing your overhead crane utilization.

The End of “Digging” for Raw Materials in Metal Fabrication

For Steel Service Centers and manufacturers of high-precision components—like hygienic stainless steel fittings or pharmaceutical-grade tubing—inventory management is a battle between accessibility e surface integrity. Traditional static cantilever racks force a “Last-In, First-Out” (LIFO) nightmare. If the specific 316L tube bundle you need for a rush order is on the bottom level, your operators waste 20 minutes moving the top three bundles just to get to it.

This process, often called “double handling,” is where profit bleeds out. More importantly, every time a forklift tine scrapes against a bundle of polished tubes during this shuffling process, you risk compromising the Ra (Roughness Average) surface finish, turning high-value inventory into scrap metal.

The Solution: 100% Extension for 100% Access

O Suporte em balanço de braço oscilante (also known in the industry as a crank-out or roll-out rack) fundamentally changes this workflow. Unlike static racks, every arm level on this system functions like a heavy-duty drawer.

Operator manually rotating the crank handle to extend the swing arm cantilever rack level

Single-operator manual crank mechanism allows for easy access to specific tube bundles.

By rotating a crank or pressing a button on an electric model, the entire storage level extends 100% into the aisle. This exposes the entire length of the tube or bar stock to the overhead space, completely eliminating the need to move upper layers to access lower ones.

Optimized for Overhead Cranes: A Safer Workflow

In heavy metal processing, the overhead bridge crane is the safest and most efficient way to move long materials. However, traditional racks block overhead access, forcing you to use forklifts in narrow aisles. This creates a high risk of collision and limits your ability to handle long items (20ft+) without wide, wasteful turning radiuses.

O nosso overhead crane accessible racking bridges this gap. Once the arm is swung out:

  • Direct Vertical Lift: The crane hook or vacuum lifter drops straight down. No maneuvering, no tilting.
  • Zero Side-Impact: Since the load is lifted vertically, there is no friction or dragging against adjacent bundles, preserving the critical surface finish of stainless steel or aluminum profiles.
  • Single Operator Capability: One person can safely retrieve a 5,000 lb bundle of solid bar stock in under 3 minutes, without waiting for a forklift driver.
Red heavy-duty swing arm cantilever rack in a warehouse designed for overhead crane access

Overhead crane access eliminates aisle requirements and reduces forklift traffic.

Get a Quote for Your Facility

Reclaim Your Production Floor Space

Space in a manufacturing plant is expensive—often too expensive to be used for air. Traditional racks require aisles that are 12 to 15 feet wide to accommodate the turning radius of a heavy-duty forklift carrying 20-foot tubing. That is “dead space” that generates no revenue.

By switching to a telescopic cantilever rack system, you can reduce aisle width to just what is needed for the operator to walk (or the arm to extend). This typically results in a 50% reduction in floor space usage for the same amount of inventory. For a growing steel service center, this reclaimed space means room for an additional laser cutter or CNC machine, directly impacting your bottom line.

Blue single-sided swing arm rack storing heavy gauge steel pipes efficiently

High-density storage allows you to store more raw materials in a smaller footprint.

Technical Specifications & Customization

We understand that storing hollow structural sections (HSS) is different from storing solid stainless steel bars. Our systems are engineered with structural steel components (not roll-formed light gauge steel) to handle the immense point loads typical in the metal industry.

Caraterística Specification Range
Load Capacity (Per Arm Level) 2,000 lbs to 10,000 lbs (Customizable)
Rack Height Typically up to 16 ft (Dependent on ceiling/crane height)
Arm Extension 100% Full Extension
Material Lengths Accommodates 10′, 20′, 24′ standard mill lengths
Operation Mode Manual Crank (Mechanical Assist) or Electric Motorized

For high-volume environments where speed is critical, we offer electric motorized options. These allow operators to control the racking system via remote, further improving ergonomics and speed.

Operator using a remote control for an electric swing arm cantilever rack

Electric roll-out systems reduce operator fatigue and speed up cycle times.

Frequently Asked Questions (Steel & Metal Industry)

Q1: Can this rack handle the weight of solid stainless steel bars?
Yes. Our systems are built using structural I-beam and H-beam steel. We can engineer arm levels to support up to 6,600 lbs (3,000 kg) or more per level, making them ideal for dense materials like solid bar stock.

Q2: Will the arms sag over time under heavy loads?
No. We use high-tensile structural steel and heavy-duty bearings. Unlike roll-formed racks that can deform, our structural components are designed to maintain tight tolerances and levelness even under maximum load.

Q3: How do you prevent scratching of polished tubes (e.g., sanitary grade)?
We offer optional UHMW (Ultra-High Molecular Weight) polyethylene liners or other non-marring materials on the cantilever arms. Combined with the overhead crane loading method (which eliminates sliding), this ensures your surface finish remains pristine.

Q4: What are the floor requirements for installation?
Because these racks store high-density loads in a small footprint, a reinforced concrete floor is usually required. We will provide point load calculations for your facility engineers to verify, typically requiring 6-inch reinforced concrete.

Q5: Can I store different lengths of material on the same rack?
Yes. While the arms are fixed to the columns, you can store shorter off-cuts or different standard lengths (e.g., 12ft and 20ft) on the same level, provided the load is distributed correctly across the bearing arms.

Need a Custom Storage Solution?

Speak directly with our technical engineers. We offer free structural designs, heavy-duty catalog evaluations, and quick B2B price quotations.

Request a Quote Now →