Back to Insights

Heavy duty roll out cantilever

Wide shot of partially extended crank out storage rack ID-5376 | High efficiency for easy item access
Double-sided heavy duty roll out cantilever rack for steel profiles

Your precision-ground stainless bars shouldn’t be treated like scrap metal.

Stop burying your high-value inventory under tons of steel. Eliminate the “digging,” the surface scratches on 316L tubes, and the dangerous forklift maneuvering in tight aisles. Upgrade to a system designed for immediate, overhead access.

The Hidden Cost of Storing High-Value Metal Assets

For Steel Service Centers and manufacturers handling high-purity stainless steel tubing, pharmaceutical-grade piping, or polished bar stock, storage isn’t just about space—it’s about **quality preservation**.

In a traditional setup, you are likely stacking bundles on the floor or using static cantilever racks. The problem? To get to the specific heat number or diameter at the bottom of the stack, your operators have to move the top three bundles. This “secondary handling” is where profit bleeds out. Every time a forklift fork touches a bundle of polished tubes to move it out of the way, you risk surface scratches, dents, and contamination. For hygienic component manufacturers (like those adhering to ASME BPE standards), a single scratch can condemn an entire length of expensive alloy.

De Heavy duty roll out cantilever changes the physics of your warehouse. It transforms static storage into a dynamic retrieval engine.

Heavy duty roll out cantilever with extended drawers for overhead crane access

Figure 1: Full extension capabilities allow for direct overhead crane picking, eliminating side-loading damage.

How the Roll-Out System Protects Your Inventory

The core innovation of the Heavy duty roll out cantilever is the 100% extension capability. Each arm level functions as an independent drawer that can be cranked or powered out into the aisle.

1. The “Crane-First” Approach

Traditional racks force you to use forklifts. Forklifts require wide aisles (often 12-14 feet) and rely on the driver’s skill to avoid gouging the material. By allowing the rack levels to roll out completely, you open the material up to the ceiling. This means you can use your **overhead bridge crane** or vacuum lifters to pick up heavy bundles of steel pipe or delicate profiles.

* **Result:** Zero contact between lifting equipment and the side of the material. No more “fork rash” on your stainless steel.

2. Eliminating the “Honeycombing” Effect

In static racks, empty slots (honeycombing) are hard to fill if they are deep inside a stack. With a roll-out system, every single level is accessible 100% of the time. You can pick a specific bundle of 2-inch OD tubing from the bottom level without touching the 4-inch OD tubing stored above it.

Operator using remote control for electric heavy duty roll out cantilever

Figure 2: Electric drive systems allow operators to access heavy loads (up to 10,000 lbs per level) with a simple remote control.

Technical Specifications: Built for Heavy Metal

This is not light-duty shelving. This is structural steel engineering designed to hold the weight of solid bar stock and thick-wall piping.

Functie Specificatie Benefit for Metal Processors
Laadvermogen Up to 6,600 lbs – 11,000 lbs per arm level Supports dense bundles of solid stainless bar or heavy-wall pipe without deflection.
Extension 100% Full Extension Allows vertical hoisting via crane; no need to slide material out manually.
Material Length 20 ft, 24 ft, 40 ft (Customizable) Accommodates standard mill lengths of tubing and profiles.
Surface Protection UHMW / Poly Lined Arms (Optional) Prevents carbon steel contamination on stainless products; prevents scratching.

Organization and Safety

Beyond just holding weight, the system organizes your “remnants” and short bars. By using dividers on the arms, you can separate different grades (e.g., 304 vs. 316L) on the same level, ensuring material traceability is maintained—a critical factor for ISO and ASME audits.

Close up of dividers on heavy duty roll out cantilever

Figure 3: Adjustable dividers ensure different alloy grades or diameters remain separated and organized.

Get a Quote for Your Facility

Installation: Anchoring Your Efficiency

Because of the immense leverage created when a fully loaded arm (holding potentially 5 tons of steel) is extended, proper installation is non-negotiable. The Heavy duty roll out cantilever utilizes a massive H-beam base that must be anchored into high-PSI concrete. This ensures that even when the drawers are fully extended for a crane pick, the center of gravity remains secure.

Installation of heavy duty roll out cantilever base anchoring

Figure 4: Secure anchoring is critical for stability when heavy loads are extended into the aisle.

FAQ: Metal Storage Solutions

Q1: We store polished stainless steel tubes. Can the arms be lined to prevent scratching?
Yes. We offer UHMW (Ultra-High Molecular Weight Polyethylene) strips or other non-marking linings for the arms. This is standard for customers in the food/pharma fabrication sectors to prevent metal-on-metal contact and carbon contamination.

Q2: What is the maximum length of pipe we can store?
Our systems are modular. We regularly install racks for standard 20-foot and 24-foot lengths, but by adding more towers/columns, we can accommodate 40-foot or even 60-foot extrusions and pipes while maintaining structural rigidity.

Q3: Can we use our existing 10-ton overhead crane with this rack?
Absolutely. That is the primary design intent. Since the drawers extend 100% clear of the rack structure, your crane operator has a clear vertical line to the load, making it the safest way to handle heavy bundles.

Q4: Do we need special flooring for these racks?
Because of the high density of the load (often consolidating what used to be on the floor into a small footprint), a standard 6-inch reinforced concrete slab is usually sufficient, but we will calculate the specific PSI requirements based on your load weights to ensure safety.

Q5: What is the difference between the crank-out and electric models?
For loads under 6,600 lbs per drawer, the manual crank is very ergonomic and easy for one person to use (requires about 20-30 lbs of force). For extremely heavy loads (over 6,600 lbs) or high-frequency cycling, the electric drive is recommended to reduce operator fatigue and speed up cycle times.

Need a Custom Storage Solution?

Speak directly with our technical engineers. We offer free structural designs, heavy-duty catalog evaluations, and quick B2B price quotations.

Request a Quote Now →