Back to Insights

カンチレバーラックを引き出します

Blue single-sided pull out cantilever rack storing heavy stainless steel pipes and tubes safely

Stop Scraping Your High-Purity Inventory.

In the hygienic stainless steel industry, a single scratch on a 20ft Ra 15µin tube turns premium product into scrap metal. Traditional static racks force you to drag materials or maneuver forklifts blindly. It’s time to switch to a system that brings the material への your overhead crane, not the other way around.

The Hidden Cost of “Digging” for Stainless Steel Tubes

For Steel Service Centers and manufacturers of hygienic components (like those supplying the pharmaceutical or dairy industries), inventory integrity is everything. You are dealing with 304L and 316L stainless steel, often with electropolished or high-purity finishes.

The problem with standard cantilever racking is the “LIFO” (Last-In, First-Out) trap. If the specific heat number or diameter you need is buried at the bottom of a stack or behind other bundles, your operators have to perform “secondary handling.” They spend 20 minutes moving the top three bundles just to access the one they need.

Every time a bundle is moved, the risk of surface damage increases. In your industry, where surface roughness (Ra) values are critical for ASME BPE compliance, a dent or a scratch isn’t just a cosmetic issue—it’s a contamination risk that violates 3-A Sanitary Standards.

Red heavy-duty cantilever rack in a warehouse with overhead crane access for metal profiles

Figure 1: Overhead crane accessible racking allows for vertical lifting, eliminating the side-friction damage caused by forklifts.

The Solution: 100% Extension for Vertical Access

について カンチレバーラックを引き出します (also known as telescopic or crank-out racking) changes the physics of storage. Instead of a static shelf, each arm level acts as a drawer that extends 100% out into the aisle.

This capability completely alters your retrieval workflow:

  1. Zero Friction Extraction: The drawer rolls out, exposing the entire length of the tube bundle.
  2. Crane Dominance: You no longer need to jam a forklift tine into a tight bundle. Your クレーン drops a strap or vacuum lifter directly from above.
  3. Single-Operator Workflow: One person can crank out a fully loaded arm (up to 6,600 lbs capacity per level), pick the specific tube, and return the rack, all without the material ever touching a neighbor.
Operator using a manual crank handle to extend a rack drawer

Figure 2: The manual crank mechanism allows a single operator to move tons of steel with minimal effort.

Engineered for Heavy-Duty Steel Profiles

Unlike light-duty shelving, these systems are built with structural steel profiles to handle the density of solid bar stock and thick-walled pipes. The base is constructed from heavy H-beams to prevent tipping, even when fully extended.

For high-volume centers processing massive quantities of raw material daily, we also offer electric roll-out cantilever options. These allow operators to control the extension via remote, further improving ergonomics and speed.

Operator using a remote control for an electric telescopic cantilever rack system

Figure 3: Electric drive systems are ideal for high-frequency access in busy steel service centers.

Talk With An Expert

ROI: Space, Speed, and Safety

Implementing a Telescopic Cantilever Rack strategy yields immediate operational data improvements for a steel processing facility:

メートル Traditional Cantilever Pull Out Cantilever
Aisle Width 12-15 ft (Required for Forklift Turning) 5-6 ft (Only for Operator Walkway)
Retrieval Time 15-25 Minutes (Digging/Restacking) 2-4 Minutes (Direct Access)
Damage Risk High (Fork impact & sliding friction) Near Zero (Vertical lift via Crane)
Floor Space Usage Low Density Saved up to 50% Floor Space

By condensing your storage footprint, you free up valuable square footage on the shop floor for more revenue-generating machinery, such as additional saw cutting stations or CNC tube benders.

Worker tightening bolts on the base of a heavy duty telescopic rack

Figure 4: Secure anchoring ensures stability even when storing tons of solid bar stock.

よくある質問(faq)

1. Can this rack handle 20-foot lengths of solid stainless steel bar stock?

Yes. The racking is modular. For 20-foot (approx. 6 meters) loads, we typically configure the system with 4 or 5 structural columns to prevent deflection. The load capacity can be customized up to 11,000 lbs (5,000 kg) per level, making it ideal for dense bar stock.

2. How do I prevent cross-contamination between carbon steel and stainless steel on the same rack?

We can provide arms fitted with UHMW (Ultra High Molecular Weight Polyethylene) liners. This ensures your stainless steel tubes never touch the carbon steel structure of the rack, preventing iron contamination and rust transfer.

3. Is the system compatible with vacuum lifters?

Absolutely. Because the drawers extend 100% into the aisle, there is zero overhead obstruction. This is the perfect setup for vacuum lifters, which require clear vertical access to grip sheet metal or smooth tubes without damaging the surface.

4. What is the maximum height for these racks?

While we can engineer taller systems, most clients in the metal service sector opt for heights between 12 to 16 feet. This keeps the top level easily accessible by the facility’s existing overhead crane system without hitting the ceiling limits.

5. Does installation require special flooring?

Due to the high-density loading (often replacing floor stacking), a standard 6-inch reinforced concrete slab is usually sufficient, but we always perform a load calculation based on your specific inventory weight to ensure your floor can handle the concentrated point loads of the columns.

Need a Custom Storage Solution?

Speak directly with our technical engineers. We offer free structural designs, heavy-duty catalog evaluations, and quick B2B price quotations.

Request a Quote Now →